Tankess Water Heaters - Point Of Use Information

Produce Hot Water At The Point Of Use!

The DHC-E-10 Tankless Electric
Hot Water Heater Is:

Designed for all point-of-use water heating applications.
Features Advanced Microprocessor Control.
Featuring 2 temperature sensors and one flow sensor.
3 stage heating elements.
Continuous water temperature monitoring. Dial in required temperature at the unit.
Exclusive scald-guard thermostat.
Simple design of plumbing system.
Save on Electricity!
Sleek design fits anywhere.
Seismic proof construction.
3 year Warranty.
No long waiting for hot water
Installs without a temperature pressure relief valve.
No circulating pumps.
Unlimited supply of hot water.
Can supply several faucets at once for commercial applications.

The DHC-3-1 Tankless Electric
Hot Water Heater Is:

Designed for all point-of-use water heating applications.
Exclusive scald-guard thermostat.
Instant hot water anytime.
Compact size fits anywhere.
Save on Electricity!
Equipped with safety high-limit with manual reset.
No wasted hot water sitting
in a holding tank.
Save on installation costs.
No pressure relief valve*, drains, or circulating pumps needed.
3 year Warranty.
No long hot water pipe runs
Cuts water heating costs by up to 50 percent in comparison with tank-type electric water heaters.

* Except in Massachusetts

In a residential setting, The STIEBEL ELTRON DHC-E-10 and DHC-3-1
tankless water heaters are suited for the following applications:

Added/Remote Bathrooms Kitchen Sinks	Laundry Areas Small Cabins
The Stiebel Eltron Point Of Use Tankless Hot Water Heaters are not recommended for showers and baths. Click here for the Stiebel Eltron Whole House alternative.

The STIEBEL ELTRON DHC-E -10 and DHC-3-1 tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial/industrial setting:

Office Buildings
Warehouses
Manufacturing Plants

Gas Stations
Campgrounds
Laboratories

The STIEBEL ELTRON DHC tankless water heaters are designed for installation at the point of use. They supply hot water instantaneously and continuously at any time, since water is heated as it flows through the unit. A water flow activated switch turns the heating elements on and off. The use of flow reducing devices such as faucet aerators is recommended in conjunction with tankless water heaters.

DHC-3-1 Technical Data

Data	DHC-3-1
Phase	1
Voltage V	120
Wattage KW	3.0
Amperage AMP	25
Min. Required circuit breaker A	30
Recommend wire size AWG Copper	10
Min. flow to activate unit GPI/I/min	0.32/1.2
Pressure loss in unit PSI/bar	2.88/0.23
Weight Lb/kg	4.6/2.1
Dimensions Height/Width/Depth	14 3/16" (36.0 cm) / 7 7/8" (20.0 cm) / 4 1/8" (10.4 cm)
Normal water volume	0.13 gal/0.51
Working pressure max.	125 psi/10 bar
Tested to pressure	250 psi/ 20 bar
Water connections	1/2" NPT

DHC-E-10 Technical Data

Data
DHC-E -10

Phase
1

Voltage                                            V 208 240

Wattage                                          KW 7.2 9.6

Amperage                                     AMP 35 40

Min. Required circuit breaker                A 40 50

Recommend wire size        AWG Copper 8 8

Max. temp. increase above ambient water temperature
                                         @ 0.75 GPM 65 87

                                         @ 1.00 GPM 49 65

                                         @ 1.50 GPM 33 44

Min. water flow to activate unit GPM/lmln 0.45/1.7

Weight                                         Lb/kg 5.9/2.7

Working pressure                   PSI/BAR 150/10

Tested to pressure                  PSI/BAR 300/20

Water connections 1/2" NPT